IJOPE Volume 35, Issue 3, September 2025

Table of Contents

Different Artificial Neural-Network Architectures for Riser VIV Analysis 225
Maokun Ye, Decheng Wan, Haichao Liu and Bowei Song
doi:10.17736/ijope.2025.ak71
A Method to Assess Ice-impact Tolerance of Non-ice-class Ships: Conservation of Energy Approach 234
Andrew T. Metzger and Ahmed Ibrahim
doi:10.17736/ijope.2025.ik16
Extending Wave in situ Measurements Through Gaussian Process Regression: An Experimental Campaign 244
Leonardo Gambarelli, Edoardo Pasta, Francesco Ferri and Giuseppe Giorgi
doi:10.17736/ijope.2025.ak72
Geohazards to Offshore Wind Developments on the U.S. Atlantic Coast 252
Sanjeev Malhotra and Daniel O’Connell
doi:10.17736/ijope.2025.jc956
Balancing Stabilization and Energy Absorption for Wind-Wave Hybrid Platforms via a Generalized LQR Control 265
Maria Luisa Celesti, Nicolás Faedo and Giuliana Mattiazzo
doi:10.17736/ijope.2025.jc960
Viscous CFD Analyses of Cavitation for Trochoidal Propellers 272
Ville Viitanen, Mika Nuutinen, Antono Sánchez-Caja, Jussi Martio and Ilkka Perälä
doi:10.17736/ijope.2025.hl01
Effect of Inclination Angle on Particle Dynamics in Dense Pipe Particulate Flows 281
Yan Zhang, Xuihui Zhang, Wanlong Ren and Xiaobing Lu
doi:10.17736/ijope.2025.jc940
Numerical Investigations of Wake Flows of an Underwater Vehicle near Free Surface in Two-Layer Fluids 289
Gang Gao, Liushuai Cao, Decheng Wan and Jie Zhu
doi:10.17736/ijope.2025.ak75
Practical Methods for Evaluating the Outflow Rate of Backfill Material from a Sloping Dike Covered with Perforated Blocks 300
Yoshimichi Yamamoto, Ryo Fukuhara and Silarom Kornvisith
doi:10.17736/ijope.2025.ak69
Hydrodynamic Behavior of Multi-Body Floating Solar Platform with Beam or Shell Connectors and Comparison of Design Capacity 309
Byoung Wan Kim and Kangsu Lee
doi:10.17736/ijope.2025.mm36
A CFD-based Optimization Method for Achieving Low Cost of Transport of Robotic Fish 317
Yunfei Wang, Weiyuan Sun, Wei Tang, Zhenping Yu, Shunxiang Cao and Juntian Qu
doi:10.17736/ijope.2025.jc944
Investigations into the Fatigue Strength of Thermally Cut Edges in Steel Structures Considering Post-Treatment Methods 325
Markus Schröder, Ralf Glienke, Daniela Schwerdt, Florian Kalkowsky, Maik Dörre, Wilko Flügge, Mohammad Aljomaa
and Natalie Stranghöner
doi:10.17736/ijope.2025.jc948

 

Full paper PDF files are available for purchase at:

https://onepetro.org/IJOPE