HPM I: Friction Stir Welding of Steel

Introduction

Ayer, R, ExxonMobil Research & Engineering; USA

Friction Stir Welding of Super Martensitic Stainless Steel

Steel, R J, MegaStir Technologies; USA; dos Santos, J F, GKSS Forschungszentrum GmbH, Germany; Nelson, E, Brigham Young Univ; Packer, S M, Advanced Metal Products, USA

Microstructure and Mechanical properties of Friction Stir Welded 430 Stainless Steel

Park, S H, Sato, Y S, Kokawa, H, Tohoku Univ; Okamoto, K, Hirano, S, Inagaki, M, Hitachi Ltd, Japan

Effect of FSW Tool Material on Debris Field in Hard Metals

Li, T, Trapp, T, EWI; Helder, E, GEAE SSE Joining Development; Subramanian, P R, General Electric, USA

Properties and Microstructure of Friction Stir Welded Inconel Alloy 600

Sato, Y S, Arkom, P, Park, S H C, Kokawa, H, Tohoku Univ; Japan; Nelson, T W, Brigham Young Univ; Steel, R J, MegaStir Technologies, USA

A Preliminary Study on the Properties of Friction Stir Welded Joints in a S355 Steel

Müller, S, GKSS Forschungszentrum GmbH, Germany; Johnson, R, TWI, UK; dos Santos, J F, GKSS Forschungszentrum GmbH, Germany; Threadgill, P, TWI, UK

Development of FSW Process for Steel Assemble to Shipbuilding and Offshore Structure

Shinoda, T, Takegami, H, Nagoya Univ; Hirakawa, M, Yamamoto, H, Hitachi Construction Machinery, Japan

Mechanical Properties of Friction Stir Welds of Ultrafine Grained Steel and other Materials

Fujii, H, Cui, L, Tsuji, N, Nakata, K, Nogi, K, Osaka Univ, Japan

Interface Microstructure in Dissimilar Friction Welded Joint

Ayer, R, Jin, H, Mueller, R, Ling, S, ExxonMobil Research & Engineering; Ford, S, ExxonMobil Upstream Research, USA

Tool Geometries and Process Parameters Required to Friction Stir Weld High Melting Temperature Materials

Packer, S M, Advanced Metal Products; Steel, R J, MegaStir Technologies; Nelson, T W, Sorensen, C, Brigham Young Univ; Mahoney, M, Rockwell Scientific, USA

HPM II: Friction Stir Welding of Aluminum

Welding Properties between 6063 Aluminum and S45C Steel by Friction Stir

Yasui, T, Shimoda, Y, Tsubaki, M, Fujimoto, M, Toyohashi Univ of Technology, Japan

Measurement of Quantity of Heat in Friction Welding

Isshiki, Y, Setsunan Univ; Yamaguchi, H, Osaka Prefecture Univ; Kawai, G, Sawai, T, Osaka Sangyo Univ; Ogawa, K, Osaka Electric-Communication Univ, Japan

Friction Stir Welding of 7055 Al Alloy

Jung, S B, Sungkyunkwan Univ; Yeon, Y M, Suwon Science College; Lee, W B, Lee, C Y, Kim,  SK, Sungkyunkwan Univ, Korea

Reliability of Microstructure in FSW Joints of Aluminum Alloys at Elevated Temperature

Shibayanadi, T, Maeda, M, Osaka Univ, Japan

Reliability of Microstructure in FSW Joints of Aluminum Alloys at Elevated Temperature

Shibayanagi, T, Maeda, M, Osaka Univ, Japan

Friction Welding of Aluminum Alloy Applied Positioning Control

Shinoda, T, Ishikawa, K, Takegami, H, Nagoya Univ, Japan

Friction Welding of Aluminum Alloy Applied Poisoning Control Process

Shinoda, T, Ishikawa, K, Takegami, H, Nagoya Univ, Japan

HPM III: Welding 1

Development of Three Dimensional FEM Using Temperature Dependent Interface Element for Predicting Pear-shaped Bead Cracking under Narrow Gap Welding

Shibahara, M, Kanazawa Inst of Technology; Itoh, S, Serizawa, H, Murakawa, H, Osaka Univ; Nakamura, T, National Inst for Materials Science, Japan

Development of Single Side Single Pass Submerged Arc Welding Procedure for C-Mn Steel Plates Using Reusable Backing Strip

Mandal, N R, Maiti, R, Indian Inst of Technology Kharagpur, India

Development of Block Assembly Planning System for Robotic Welding System

Sheen, D M, Chung, J H, Univ of Ulsan, Korea

Optimization of Resistance Spot Welding Conditions on 7075-T6 Aluminum Alloy Sheets by the Taguchi Method

Lee, C S, Changwon Polytechnic College; Kim, Y K, Park, Y H, Min, B H, Yoon, H K, Dongeui Univ, Korea

HPM IV: Welding 2  (V. 4)

Development of High-performance Steel with Excellent Weldability 

Kang, K B, POSCO, Korea

Development of Yb Fibre Laser/MAG Hybrid Procedures for Girth Welding of Pipelines

Howse, D S, Booth, G, Scudamore, R, TWI; Howard, R, BP Exploration, UK

Use of PE-GTAW to Control Microstructure in Duplex Stainless Steels

Ames, N, EWI; Frye, C, ExxonMobil Development, USA; Larsen, K, Sandvik Materials Technology, Sweden,

Inclusion Metallurgy in Welding

Komizo, Y, Osaka Univ, Japan

Hybrid Welding of Ti Alloys

Shinn, B, Denney, P, EWI, USA

Mechanically Control Pulsed Short Circuit GMAW of Advanced Alloys

Stanzel, D, Miller Electric; Dierkshiede, J, Boyd, C, Ames, N, EWI, USA

Evolution of Residual Stresses in Welding of Supermartensitic 13% Cr Stainless Steels

Aune, R, Olden, V, Rorvik, G, Akselsen, O M, SINTEF Materials and Chemistry, Norway